Manthan
Average
- Joined
- May 24, 2013
- Messages
- 264
- Reaction score
- 30
ATTENTION EVERYBODY
Cracking a Wifi (WEP) Password :-
METHOD 1:: Getting Past a Log In Password.
1) Boot the computer in safe mode.
2) Click “Start”.
3) Click “Run”.
4) Type in “control userpasswords2”. [1]
5) Change passwords for any account.This is
probably going to be obvious to the user, so
you may have to tell them a little white lie.
Try something along the lines of: "Oh, I hear
computers glitch like that sometimes. You
can always type in recoverpassword if you
get locked out and then set a new
6) Reboot the computer.
METHOD 2::
Getting Remote Access
1) Download the program LogMeIn. There is
a free version, though you can purchase a
subscription if that better meets your needs.
[3]
*.The program will need to be downloaded
to the computer you intend to remotely view
or use. This makes it useful for gaining
access to your computer if it is stolen or for
checking up on your teen’s daytime activities
during the summer.
*.You will have to make an account with the
LogMeIn website in order to use the
software.
2) Log in to the website.Log in to LogMeIn’s
website.
3) Navigate to the “My Computers” page. It
should open automatically when you sign in.
4) Add the computer you intend to remotely
access.You will see an “Add computer”
button on the page. Click that and fill in the
info for the computer you intend to access.
5) Click the name for the computer once it’s
added.
6) Log on to the computer.This means you’ll
have to know the username and password for
the account you’re trying to access or view.
7) Click “Remote Control”. If you’re trying to
be sneaky (such as to spy on the user), try to
move the mouse as little as possible and
don’t click on anything.
8) Log out when you’re done.
METHOD 3::
Cracking a Wifi (WEP) Password
1) Download the necessary programs.You will
need 2 programs to make this hack work:
CommView (which will be used to look for
vulnerabilities in the network you’re trying to
access [4]) and AirCrackNG (which will break
the security key itself)
*.Make sure your computer’s wireless
adaptor is compatiblewith CommView.
2) Find a Network. Use CommView to scan
for wireless networks. Choose a network with
a WEP key and a decent signal.
3) Filter the search to that network. Right
click on the network you want to access,
select “Copy MAC address”, go to the Rules
tab, then MAC Addresses, enable MAC
address rules, then click Action→Capture→
Add Record→Both. Paste in the MAC address.
4) View Data packets.Sort out the
Management (M) and Control (C ) packets so
that you are only viewing the Data (D)
packets.
5) Save the packets. Go to the Logging tab
and enable auto saving. You may need to
change the settings on the Directory size and
File size. Try 2000 and 20, respectively.
6) Press the “Play” button to begin collecting.
Wait until you have at least 100,000 packets.
7) Click “Concatenate Logs” under the Log
tab. Make sure all of the logs are selected.
8) Export the logs. Go to the folder where
the logs were saved and open the log file.
Click File→Export→WireShark/tcpdump
format and save it where you can find it
easily.
9) Open the newly created file with Aircrack.
Start Aircrack and choose WEP. Open the file
and click “Launch”.
10) Enter the index number. When the
command prompt opens, you’ll need to enter
the index number for the target network. It
is probably
1. Hit enter and wait. If it works,
the key will be shown..!
DonT forgEt to hit liie if it wrks for u
Cracking a Wifi (WEP) Password :-
METHOD 1:: Getting Past a Log In Password.
1) Boot the computer in safe mode.
2) Click “Start”.
3) Click “Run”.
4) Type in “control userpasswords2”. [1]
5) Change passwords for any account.This is
probably going to be obvious to the user, so
you may have to tell them a little white lie.
Try something along the lines of: "Oh, I hear
computers glitch like that sometimes. You
can always type in recoverpassword if you
get locked out and then set a new
6) Reboot the computer.
METHOD 2::
Getting Remote Access
1) Download the program LogMeIn. There is
a free version, though you can purchase a
subscription if that better meets your needs.
[3]
*.The program will need to be downloaded
to the computer you intend to remotely view
or use. This makes it useful for gaining
access to your computer if it is stolen or for
checking up on your teen’s daytime activities
during the summer.
*.You will have to make an account with the
LogMeIn website in order to use the
software.
2) Log in to the website.Log in to LogMeIn’s
website.
3) Navigate to the “My Computers” page. It
should open automatically when you sign in.
4) Add the computer you intend to remotely
access.You will see an “Add computer”
button on the page. Click that and fill in the
info for the computer you intend to access.
5) Click the name for the computer once it’s
added.
6) Log on to the computer.This means you’ll
have to know the username and password for
the account you’re trying to access or view.
7) Click “Remote Control”. If you’re trying to
be sneaky (such as to spy on the user), try to
move the mouse as little as possible and
don’t click on anything.
8) Log out when you’re done.
METHOD 3::
Cracking a Wifi (WEP) Password
1) Download the necessary programs.You will
need 2 programs to make this hack work:
CommView (which will be used to look for
vulnerabilities in the network you’re trying to
access [4]) and AirCrackNG (which will break
the security key itself)
*.Make sure your computer’s wireless
adaptor is compatiblewith CommView.
2) Find a Network. Use CommView to scan
for wireless networks. Choose a network with
a WEP key and a decent signal.
3) Filter the search to that network. Right
click on the network you want to access,
select “Copy MAC address”, go to the Rules
tab, then MAC Addresses, enable MAC
address rules, then click Action→Capture→
Add Record→Both. Paste in the MAC address.
4) View Data packets.Sort out the
Management (M) and Control (C ) packets so
that you are only viewing the Data (D)
packets.
5) Save the packets. Go to the Logging tab
and enable auto saving. You may need to
change the settings on the Directory size and
File size. Try 2000 and 20, respectively.
6) Press the “Play” button to begin collecting.
Wait until you have at least 100,000 packets.
7) Click “Concatenate Logs” under the Log
tab. Make sure all of the logs are selected.
8) Export the logs. Go to the folder where
the logs were saved and open the log file.
Click File→Export→WireShark/tcpdump
format and save it where you can find it
easily.
9) Open the newly created file with Aircrack.
Start Aircrack and choose WEP. Open the file
and click “Launch”.
10) Enter the index number. When the
command prompt opens, you’ll need to enter
the index number for the target network. It
is probably
1. Hit enter and wait. If it works,
the key will be shown..!
DonT forgEt to hit liie if it wrks for u
BHAI YA AISE HI COPY PASTE MAR DIYA 
any video or any link? 
